Principle of full-automatic wire stripping machine: First of all, the feeding material should be run through the feeder and the outlet wheel, and the function of cutting and stripping should be completed through the tool holder assembly.
1. Brief introduction of the functions of the main components of the peeling machine.
1) incoming wheel: conveying wire and stripping thread. It can strip both the head and the tail of the thread (0.002L.m) while stripping the short thread. Besides stripping the head of the thread, it also has the function of stripping several places in the center.
2) outlet line: conveying wire and stripping terminal. (when the computer stripper is not effective when stripping the short line, the position of the outlet wheel should be kept at the maximum position).
3) feeder vacancy dispatching wheel: dispatching feeder vacancy, the right-handed vacancy increases, the forward vacancy decreases (according to wire thickness adjustment).
4) Intake wheel pressure dispatching wheel: dispatch the inlet wheel pressure, pull out clockwise rotation, when the inlet wheel pressure increases, pull out counter-clockwise rotation, the inlet wheel pressure decreases. (judged by the strength of the wire bark, that is, it is difficult to strip the wire bark, it is difficult to increase the pressure, it is easy to reduce the pressure)
5) Out-wheel vacancy dispatching wheel: dispatch out-wheel vacancy, the forward vacancy increases, the right-hand vacancy decreases (according to wire thickness adjustment).
6) Outlet wheel pressure dispatch knob: dispatch out of the wheel pressure, pull out after the counter-clockwise rotation, out of the wheel pressure increased, pull out after clockwise rotation, inlet wheel pressure decreased. (Judging from the strength of the wire bark, that is, it is difficult to strip the wire bark, but it is difficult to increase the pressure, and easy to reduce the pressure)
7) Tool holder assembly: when wire plugging, stripping head and tail, stop state, upper and lower blades need to be opened to the maximum, facilitate smooth passage of wire.
Matters needing attention in safety operation
Thank you very much for your attention to Shenzhen Zhansheng Automation Technology Machinery Full Automatic Computer Stripper Bending Machine, Natural Winding and Wiring Energy Series! In order to ensure that you can safely and correctly use the stripping machine, please read the instructions carefully before use.
1. In order to make the machine work voltage stable, some users choose to distribute the power supply regulator to prevent the machine from burning out because of the high voltage.
2. Make sure that the machine should be placed on a smooth surface to prevent the machine from falling and damaging.
3. Do not use the machine near the area with strong electromagnetic field to prevent interference to the machine.
4. Keep in mind that no articles should be placed on the machine or close to corrosive chemicals. If necessary, keep the working environment monotonous, ventilated and dust-free, and the operating room temperature should not be too high.
5. When using this machine, it is assumed that the effect of stripping is not directional or that there are different degrees of shortcomings. Please read the shortcomings and cleaning methods in this manual first. Assuming that no solution has been found, please call the technical personnel of Zhansheng Automation Co., Ltd. for telephone consultation and maintenance, for your safety sake. Do not disassemble the machine and repair it yourself.