In the long-term working process of automated machinery, no matter how good the quality of the machine will occur defects may occur small problems. Fully automatic soldering machine is not an exception, as long as they can clearly know what defects appear, perhaps for the protection of the problem, it is not a big problem.
The following is the automatic solder machine defect removal and handling different methods:
1. when the machine runs, does the feeding belt orientation have fault bias?
Check the feed belt position has been changed, you can let the machine again check whether there is fault, check the feed belt part of the screw is loose.
2. the touch control flash device presents a defect problem, showing half or displaying the garbled phenomenon.
Check whether the connection is loose, start from scratch to see if there is any damage to the display cable. If there is no problem with the connecting line, it is the internal fault of the display screen.
3. after turning on the power switch, the machine did not respond.
Check the socket plug is not plugged in or loose, check the power switch is not open, check whether the fuse is broken.
4. automatic feeding tin outlet does not come out of tin.
Check whether the dispatching bolts of tin conveying system have been dispatcher in place to check whether tin wire has arrived at the interface.
Common use and precautions of automatic solder machine:
1. prevent foreign objects and other debris from falling into the machine to prevent damage to the machine.
2. after the work is completed, the waste and copper wire on the automatic tin soldering machine are cleaned with a wind gun.
3. when replacing the soldering iron, the iron part should be cooled enough to prevent scalding.
4. when the machine is not at its origin, press the initial switch and proofread switch.
5 adhere to the internal cleaning of machine, and the grease can be properly coated in the conflict area.
6. often check whether the screws of the movable parts are loose, and tighten them in time to avoid unnecessary accidents.
7. do not touch the moving parts with hands when working inside the machine.
There are other problems such as unclear phenomena can also ask our technical and after-sales personnel, customer service as the center, quality as the first routine for you to solve the problem